Elantra Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
I'm having fast flash on right side after power washing under hood, due to oil plug leak after replacing head, several months ago, had no issues head related. I washed from above/below. I want to go LED for turn/tail/brake and know I'll need new relay to fix fast flash. It's been a few months since it began. Could it be a fuse/corroded connection (not likely since it began immediately after power washing), or something else?
Has anyone experienced a similar issue and how was it solved?
 

·
Vendor
Joined
·
163 Posts
I want to go LED for turn/tail/brake and know I'll need new relay to fix fast flash. It's been a few months since it began.
Hi there, if you decided to switch to LED for the tail lights, you should either pick the LED bulbs that come equipped with the load resistor, or you will have to get load resistor for each bulb separately and cut it into the chain. Here is an example of the resistor you will need: Lumen® - LED Load Resistors
 
1 - 3 of 3 Posts
Top