Elantra Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello
Hope this is the correct forum for my post.
I have a 2010 Elantra GLS Sport hat has some shifting issues when I think it is going from sometime 1st to 2nd and mostly 2nd to 3rd gear. From what I’ve read I think the issue may be related to the valve body, A4CF2. I originally did a transmission flush which did make it a slight bit better not fix it. I checked for error codes but could not see any with a reader. What I want to do now is to remove the valve body and clean and check it or replace with a remanded one. Has anyone done this before? If I replaced with a used one is there any alignment needed or is it just a swap out. If I tried to fix the one I have what should I be looking at other than the solenoid resistance and the flex cable solder? Any suggestions would be appropriated.
 
1 - 1 of 1 Posts
Top