open the hood.
- We pull out the pistons, which fix the grille and the upper part.
- on the perimeter at the bottom pull out the pistons.
-We turn the wheels depending on which side we will disassemble.
- in the wheel arches, we release the wheel arch liners.
For screwed-in fenders, loosen one screw from each side (screwed up from below), which fix the corners of the bumper to the wings.
the scheme of fastening of the front bumper Hyundai Elantra (2010-2015) -with the assistant the corners of the latches in the wings and pull the bumper forward.
-disconnect the connectors from the electrical equipment (if any).